Smart home design for a detached house

Smart home design for a detached house

You are building a house and you want it to be intelligent. The difficulty is that the decisions that matter most are taken long before the first switch goes on the wall — and if they are taken badly, or not at all, the only remedy left is cutting into finished walls.

Ask for a design quote

What happens at each stage of the build

Architectural drawings finished

The calmest moment

We have the floor plans, there is time to decide and nothing is chasing us. At this stage you can still influence where the plant room goes and leave space for a distribution board of the right size.

Weathertight shell

The moment for the detailed design

The electrician has not started. Every option is open: the wired central approach, the circuit count, bus routing, cable sizes to window coverings. This is the right time, and most of our designs are produced exactly here.

Electrician chasing the walls

Last call

The wiring can still be corrected, but you have to move now — before he finishes the runs. Every week of delay is less room to change anything.

After plastering

Modular solutions are what is left

A wired central installation is off the table. We then work with controllers fitted into the existing back boxes and with wireless devices. We design those too, and we are straight with you about what can no longer be achieved.

What the house actually does on its own

No promises about the home of the future. These are the functions we design most often and that our clients use every day.

01

Lighting scenes

Instead of ten switches by the door — one touch for leaving the house, for the evening, for a film.

02

Blinds and curtains

Automatic shading against the sun, retraction in high wind, positioning to a percentage.

03

Zoned heating

A separate temperature in every room and setback in the empty ones. This is where the system pays for itself fastest.

04

Leak protection

Sensors and a shut-off valve on the incoming main, working even during a power cut.

05

Alarm and cameras

Tied into the scenes — leaving the house arms the alarm, kills the lights and closes the blinds.

06

Gate and video entry

Opening from your phone, seeing who is at the gate, timed access for trades and couriers.

What cannot be left until later

Most things in a smart home can be added over time. The three below cannot, and that is precisely why the design comes before the electrician rather than after him.

!

Lighting control

In a central installation the circuit runs from the board straight to the fittings and will not light at all without a control device in the enclosure. The cable and the device are one decision, not two.

!

Cable to window coverings

Four cores for roller blinds, five for curtain tracks. Running four cores to a curtain track removes the function for good.

!

Size of the distribution board

The enclosure in a standard electrical design is too small. The sooner the electrician knows, the less it costs.

Alarm, cameras and the network are different — the cable can go in now and the equipment can follow five years later without touching the walls. That is why we allow for them in every design, even if you have no intention of buying them straight away.

Building in stages

A smart home does not have to be bought in one order, and rarely is. A sensible split looks like this: first the design, then the cabling together with the distribution board, then the system devices themselves, and finally security and network. Each of these steps can be a year apart from the one before.

There is one rule: all the cable goes in at once, the devices come in stages. A cable that is not in the wall can only be added by opening the wall again — whereas a device in the board can be clipped in at any time, provided the enclosure was designed with spare capacity.

What the design costs

An example design scope for a house of around 200 m² is shown on the Designing smart homes page.

Pricing starts at PLN 30 net per square metre of floor area, with a minimum fee of PLN 6,000 net. Floor area is only the starting point — the final figure follows the scope: the number of controlled circuits, heating zones, window coverings and technical systems that have to work together. I give an exact price once I have seen the project. The design is documentation handed over to you outright — it ties you to no contractor. Site supervision of the electrician’s work, if you want it, is quoted separately.

Ask for a quote

Frequently asked questions

Will my electrician be able to handle it?

Yes, as long as he gets the specification in a legible form — which is exactly what the detailed design is. The electrician lays cable; he does not need to know the system or program it. The design describes his scope closely enough to leave no room for guesswork.

I am not sure yet whether I want a full smart home. Is a design still worth it?

That is when it is worth most. The design costs a fraction of the installation and shows you what the house could do and what that really costs — before you spend money on cabling that cannot later be used. Once you have the design you are free not to order the installation at all.

I already have an electrical design. Isn’t that enough?

No. An electrical design describes a conventional installation — circuits that end at the switches by the door. The smart home detailed design sits above it and says which of those circuits have to come back to the board separately and what has to sit above them.

Let us talk about your house

Tell me what stage the build is at and what you expect from the house. I will come back with a concrete proposal.

Go to the contact form

or write directly: kontakt@elnext.pl · +48 530 283 277