Designing smart homes

Smart home design is mostly a conversation about how you live — the drawing for the electrician comes last. Below I describe how the design process works step by step, which decisions we make together and what a typical design scope looks like for a detached house. I design for homeowners and architecture studios in Warsaw and the surrounding area.

Ask about a design

The design process step by step

Step 1

A conversation about the household, not about devices

Who lives in the house, what an ordinary day looks like, what bothers you in your current home. This conversation produces a list of functions — devices are chosen only to match it.

Step 2

Room-by-room functional concept

What should happen with lighting, blinds and heating in each room, which scenes are needed and where the control points go. This is where the system is chosen — wired KNX or a wireless solution — and a preliminary budget is set.

Step 3

Detailed design

Circuit-to-channel allocation, bus routes, placement of panels, switches and sensors, and a calculated distribution board size.

Step 4

Documentation for the contractor

Cabling guidelines in a form the electrician can use directly, and a device schedule ready to be priced by any company.

Step 5

Answers during construction

When the electrician has questions about the design, I answer them. On-site supervision of their work, if needed, is quoted separately.

Decisions we make together

A good design does not answer the question of what can be automated, but what is worth automating. These are the topics we go through with every client.

01

How much control on the walls

One panel at the room entrance instead of three frames side by side — light switch, thermostat and blind buttons.

02

Scenes instead of switches

Leaving home, evening, movie, night. A few scenes matched to the household replace dozens of buttons.

03

Heating and cooling

How many zones, where the temperature sensors go and how the system should work with the heat pump or ventilation unit.

04

Window coverings

Roller blinds, external venetians or curtains — each needs a different cable, and this must be known before cabling.

05

Security

Alarm, flood protection, video intercom and gate — linked to scenes or left as independent systems.

06

What can wait

Which devices can be bought in a year or five — and which cables must be laid now to make that possible.

Example design scope

This is what the design scope looks like for a typical detached house of around 200 m². It is an illustrative example, not a description of a specific project — every house gives different numbers.

Lightingapprox. 35 controlled circuits, including a dozen or so dimmable ones in the living room, dining room and bedrooms
Window coveringsexternal roller blinds in all living spaces, curtains in the living room
Heatingunderfloor heating with a separate zone in every room, a temperature sensor in each zone
Control pointspanels at the entrances to living areas, switches elsewhere, control from the phone
Sensorspresence in hallways and bathrooms, leak detection next to appliances using water
Distribution boardsize calculated in the design, with spare space for devices added in later years
Documentationmarked-up floor plans, circuit allocation table, board device list, cabling guidelines, device schedule
Design costfrom PLN 6000 net (PLN 30 net per m²) — the exact amount after reviewing the project
The documentation is yours to keep. It does not tie you to any contractor — any installation team can work from it without further questions.

For architecture studios

Smart home design works best when it starts together with the interior design. I get involved at the building design stage, fit the placement of panels and fittings to your concept and prepare documentation consistent with the rest of the project — so the contractor has nothing to interpret.

Frequently asked questions

Do I need to know which system I want?

No. The choice of system is the result of the design process, not its starting point. We begin with what the house should do.

Can only some functions be designed?

Yes — for example, just blinds and heating. In that case the design leaves cables and board space for the rest, so it can be added later without chasing walls.

What do I get at the end?

A complete set of documentation that can be handed to any electrician and any company for pricing. It is described in detail on the Smart home installation design page.

Let’s talk about your home

Tell me what stage the build is at and what you expect from the house. I will get back to you with a specific proposal.

Go to the form

or write directly: kontakt@elnext.pl · +48 530 283 277